It is now common knowledge that is available in or around environments where presence of asbestos is not good for human health. Tiles laboratory testing equipment makers bring this article to share pro tips for determining asbestos floor tiles.
Understand the asbestos first. Asbestos is a silicate-based material applied in building construction for surfaces, walls or floor tiles. People living or working in buildings with old flooring find it harder to determine asbestos floor tiles by just looking.
It can be costly affair to look at the tile and find which has asbestos. Instead of this, you can assume that there is asbestos in your tiles and get it treated. You can do it if your floor was installed in 80’s or even before that.
- Examine the tiles for decay
It is your responsibility to examine the material closely to determine its present condition. Asbestos will not be dangerous if it is completely intact and well-maintained. It’s when the material is broken up releases the hazardous asbestos fibers into the air and this harmful fiber can be inhaled by human. If you find that asbestos is in really bad condition or you find any breakage in it, you must get in touch with the experts and let them remove the materials prior you start putting in a new floor.
- Look for discoloration
When inspecting your floor tiles, you must check for parts that are grayish brown, dark brown, dark gray, or black. Asphalt or vinyl tiles having these colors in them have a high likelihood of asbestos fiber.
- Date the tiles
If your flooring is done between the years of 1920 and 1960, you may have asbestos floors. The flooring during that period was made in 9”square and was thicker than today’s vinyl tiles.
- Lab test
You can stop taking all the pain and send the sample of any tile you doubt of having asbestos to a special lab for testing. You need to send at least three samples to the lab.
- Collect a tile sample
You may use a utility knife to cut your samples easily and put them inside the plastic bag. Seal the bag before sending them to the lab.
The labs use specialized Tiles laboratory testing equipment for best results. If you just feel you cannot determine the asbestos floor tiles, it is always better to contact lab and let them test the sample of your tiles.